Gooseneck and 5th Wheel Automobile Trailers - RCSGN/FW RC CROWN SERIES RACE TRAILER

RCSGN / FW - RC Crown Premium Series race trailer
"Our top of the line offering in a race and event trailer. Ideal for the professional race team, strength and styling are standard."

Specifications for RC Crown Series Gooseneck / 5th Wheel Race Trailer (RCSGN/FW) series 8 and 8 ½ wide flat top race trailers w/ 5200# axles
Available in 24, 26, 28, 30, 32, 34, and 36 foot lengths with standard tandem (TA) 5200# axles
Available in 38, 40, 42, 44, 46, 48, 50 and 53 foot lengths w/ standard triple (TR) 5200# axles
Call size includes bunk. Main floor approximately 8 feet shorter than call size.
Model code example: RCSGN/FW8.5x44TR52 – RCSGN/FW8.5x32TA3

Axles and tires
 5200# Torsion brake axles w/ ST225/75R15D Radial tires

Frame
 6 inch tube main frame
16 inch on center floor cross members
16 inch on center wall posts
16 inch on center roof bows
Painted and undercoated frame

Hitch and coupler
 Gooseneck or 5th wheel style coupler w/ safety chains
Breakaway kit safety system w/ 7 way round plug for tow vehicle

Doors
 Spring assisted ramp door w/ beavertail
Recessed camlocks on ramp door
48” camlock door curbside

Exterior
 .030 exterior sheet metal
Brite front corners
Cast corners front and rear w/ brite wrap between front cast corners
Brite rear hoop
3 inch lower trim and 6 inch extruded top trim
ATP stone guard w/ ATP access door
One piece aluminum roof
Roof vent
1 pair LED recessed tail/brake lights
LED recessed clearance lights w/ approved DOT exterior lighting

Interior
 ¾” standard plywood flooring
3/8” plywood interior walls
White vinyl insulated ceiling
4 – D rings
3 – 12V dome lights w/ wall switch

Standard dimensions
 Interior height 78”
Exterior height 105”
Exterior widest point 101”
Inside wall to wall width 90” (8 wides) - 96” (8 ½ wides)
Rear door opening width 84” (8wides) - 90” (8 ½ wides)
Rear door opening height 76”

Note: Dimensions listed are the same for 8 and 8 ½ wide models unless otherwise noted. All models in this series have wheel boxes inside unit. The distance between wheel boxes on all models is 81”.

All dimensions based on standard model in this series. Models with heavier payload capacities and axle configurations are available. Please discuss with dealer any critical dimensions before ordering.
View stats on this model in .pdf format
   




While all dimensions are listed as accurately as possible, please note any critical dimensions when ordering. Specifications are subject to change without notice. Some models may be pictured with optional equipment. Please consult your dealer to verify model standards.

Site developed and hosted by: